Firmware Update (Fail)


Link Posted 19/04/2017 - 12:07
Hi Guys
Having problems updating the firmware on my new K-S2 . I format the sd card in my camera then remove it, put the card into my card reader and copy the update to my sd card. I then put the card into the camera and switch it on, go to firmware update in the menu and there is no option to update it, i have tried several times and no joy. I must be doing something wrong but no idea what.
Any help appreciated


Link Posted 19/04/2017 - 12:28
Step no 4 from here: link

Turn the camera power on while pressing the MENU button. Then just follow on screen instructions; no need to dig into the menu.

Good luck
' remembers little things, long after you have forgotten....' (Aaron Siskind)
Last Edited by Mag07 on 19/04/2017 - 12:31


Link Posted 19/04/2017 - 13:02
You are unzipping the file? If the file on the card has a .zip extension you haven't. If it's .bin, you have.

On the computer, click on the .zip file and it will self extract into a new folder, then copy the .bin file to the root of the SD card, then proceed as described in the instructions on the Ricoh site.


Link Posted 19/04/2017 - 14:53
Make sure that you only copy the file that ends .bin to the SD card and not the whole download.
Regards, Philip


Link Posted 19/04/2017 - 17:51
And make shore you have a full battery as you could screw the it up so to speak


Link Posted 19/04/2017 - 20:21
Thanks very much guys, i have done as you suggested and voila it updated . I was trying to do it the Canon way forgetting i was now a Pentax user. Old habits die hard as they say.
Thanks again


Link Posted 20/04/2017 - 01:29
Canons go BANG! don't they?
Both the *istDS and the K5 are incurably addicted to old glass

My page on Photocrowd - link
Add a Comment
You must be registered or logged-in to comment.