DA* 200mm ED (IF), any good?
Posted 02/09/2010 - 13:38
Link
Quote:
Teleplus Pz-AF 2x MC7 element works well and you get full SDM support.
That`s the one I have did not realise it supported SDM.Teleplus Pz-AF 2x MC7 element works well and you get full SDM support.
It also works quite well on my f 35-70, and even the 18-55 kit lens.
Davex.
Posted 02/09/2010 - 17:06
Link
davex wrote:
The lens gives information to the camera, through the contacts so if the camera knows the lens has a SDM than it will use that and there is no way to force it to use the screw-drive.Quote:
As it's SDM you will have a very hard time finding a 2x AF teleconverter that will work properly
I though it also had a screw drive? have no experience with SDM, given it has both presumably it would "fail" to screw drive if a teleconverter was in place?As it's SDM you will have a very hard time finding a 2x AF teleconverter that will work properly
Because if you cover that contact the camera will think it's not an auto-focus lens at all so it will not use any means of AF
The only way is that the TC gives the information that it's AF but only the Pentax TC 1.7x AF does that as far as I know.
Posted 02/09/2010 - 17:27
Link
Anvh wrote:
Because if you cover that contact the camera will think it's not an auto-focus lens at all so it will not use any means of AF
The only way is that the TC gives the information that it's AF but only the Pentax TC 1.7x AF does that as far as I know.
The Teleplus converters and all the rebadged clones with Pz-AF in the description all have the Powerzoom pin contact that supplies power to the SDM. Teleplus/Kenko 1.5x SHQ, 1.7x SHQ 2x MC7 and early Tamron 1.4x.davex wrote:
The lens gives information to the camera, through the contacts so if the camera knows the lens has a SDM than it will use that and there is no way to force it to use the screw-drive.Quote:
As it's SDM you will have a very hard time finding a 2x AF teleconverter that will work properly
I though it also had a screw drive? have no experience with SDM, given it has both presumably it would "fail" to screw drive if a teleconverter was in place?As it's SDM you will have a very hard time finding a 2x AF teleconverter that will work properly
Because if you cover that contact the camera will think it's not an auto-focus lens at all so it will not use any means of AF
The only way is that the TC gives the information that it's AF but only the Pentax TC 1.7x AF does that as far as I know.
Used them all with SDM.
John
Posted 02/09/2010 - 17:54
Link
John I was talking about the digital info contact, it's one of the normall contacts and not the PZ ones.

That contact is use to give the camera information about the lens, including if it's an Auto Focus lens and if it use a screw-drive or a SDM.
So for an SDM lens you need this contact and the PZ, if you don't have the PZ on the TC the camera will not use the screw-drive because the camera knows the lens has SDM so will use the PZ and not the screw-drive.

That contact is use to give the camera information about the lens, including if it's an Auto Focus lens and if it use a screw-drive or a SDM.
So for an SDM lens you need this contact and the PZ, if you don't have the PZ on the TC the camera will not use the screw-drive because the camera knows the lens has SDM so will use the PZ and not the screw-drive.
Posted 03/09/2010 - 08:18
Link
Optically an excellent lens, but the sdm is not a speed daemon.
Posted 03/09/2010 - 14:10
Link
johnwhit wrote:
Hi Stefan, sorry misread your post, I thought you were implying the only converter to give SDM was the Pentax, which as far as I know doesn't. My mistake.
John
No problem, I only said that the AF 1.7x TC from Pentax is the only one that makes from a SDM a screw-driving AF focus because it intercepts the digital information off the lens.
Hi Stefan, sorry misread your post, I thought you were implying the only converter to give SDM was the Pentax, which as far as I know doesn't. My mistake.
John
Posted 03/09/2010 - 20:22
Link
My English isn't perfect either
I hope that Pentax has some news about a TC on Photokina, I saw one the 1.4x TC SDM the last time their.
I hope that Pentax has some news about a TC on Photokina, I saw one the 1.4x TC SDM the last time their.
Posted 03/09/2010 - 21:16
Link
Anvh wrote:
My English isn't perfect either
I hope that Pentax has some news about a TC on Photokina, I saw one the 1.4x TC SDM the last time their.
I think they abandoned the SDM TC which is a real shame IMHO, we could do with one or an SDM 400mm f/**My English isn't perfect either
I hope that Pentax has some news about a TC on Photokina, I saw one the 1.4x TC SDM the last time their.
John
Add Comment
To leave a comment - Log in to Pentax User or create a new account.



1568 posts
18 years
Rainhill
John
In LBA hiatus.