6x7 forced to stop being made.

Peter Elgar
Posted 26/03/2006 - 22:12 Link
Has anyone here seen the news story that Pentax is being forced to stop selling the 6x7 and 645 film cameras in Europe because they contain LEAD SOLDERING in the electronic circuits?
I read about it and also Hasselbald is stopping production of the X-Pan with immediate effect because of ruling from Brussels about the lead content.
Been a member of Pentax Club since the Ron Spillman era! Got COMPUTERISED at last - DIGITISED?
Taken the PLUNGE - BUT FILM STILL RULES !!!
LiamD
Posted 26/03/2006 - 23:45 Link
Hi Peter,

the only specific mention I could find was this (the March 24th update)

http://www.luminous-landscape.com/new/index.shtml

I couldn't find anything else, but if I get the chance, I'll have a flick through the news sites tomorrow.

Cheers

Liam
Liam


"Make your hands respond to what your mind demands." Jesse James

Best wide-angle lens? Two steps backward. Look for the 'ah-ha'. Ernst Haas
MattMatic
Posted 27/03/2006 - 09:16 Link
Just to clarify a little:
The ROHS (Reduction of Hazardous Materials) directive has been known about for years. It comes into force July 1st 2006, and many manufacturers have been leaving things to the last minute, especially in the electronics industry for reasons I'll outline. It involves many other substances other than lead - things like cadmium too. Some of those substances were used in plastic moulding colouring.

It's not so much that the product contains lead in the solder, although that is an issue, but rather that the electronic manufacturing plants which contain flow-solder baths have to contain a couple of tons of molten lead to work. It's this which is the major hazard.

Unfortunately, many manufacturers have delayed because it involves draining, cleaning, and replacing a massive volume of solder. Add to that the fact that not all electronic components are available in lead-free designs and you have a bit of a dead-lock.

The lead-free process requires higher temperatures, some different practises and new QA procedures - since lead-free soldering actually looks more like dry-joints from conventional soldering.

In many cases the migration to lead-free isn't so bad - but it does require new PCBs, and lead-free versions of components. In other cases the components just are not manufactured in lead-free variants and so the product either has to be redesigned or ditched.

Hope that helps clarify things a little.
Matt
MattMatic
Posted 27/03/2006 - 11:00 Link
News on Pentax 6x7 here:
http://www.ephotozine.com/news/fullnews.cfm?NewsID=2834

Includes 645NII, 67II and a number of compact film and digital cameras
McBrian
Posted 27/03/2006 - 13:17 Link
Here's the full list of products affected from the Pentax, German wesite, a lot of the items listed have already been discoutinued.
http://www.pentax.de/_de/photo/news/index.php?photo&news&gruppe=&news_id=151
Cheers
Brian.
LBA is good for you, a Lens a day helps you work, rest and play.

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo